Buji wallpaper construction, understand Buji wallpaper construction

Cloth base wallpaper: high strength, impact resistance, easy to clean, no edge warping and seam raking. It can be stripped as a whole during replacement without damaging the wall, saving a lot of redecoration costs. Good fire resistance, fire resistance and smoke elimination performance can meet national standards.

1. During wall treatment, varnish must be applied evenly to ensure that the wall will not be damaged during construction.

2. The viscosity of cloth based wallpaper glue is higher than that of paper-based wallpaper glue, or joint glue is added.

3. Glue shall be applied on the wall when cloth base wallpaper is posted, or on the wall and wallpaper quilt at the same time. Joint glue shall be used at the edge seam to increase the strength of the glue.

4. The cloth base wallpaper shall be overlapped and cut on the wall, and the excess glue shall be cleaned up in time after cutting.

5. Steel ruler, wallpaper knife, rubber pressing wheel, plastic scraper, special brush sponge or towel shall be used as construction tools. Do not use other hard objects, otherwise the surface of wallpaper will be scratched and delaminated, affecting the construction effect and wallpaper quality.

6. For products with obvious pearlescent effect, avoid using plastic scraper and other hard tools to avoid visual color difference.

7. Due to the certain ductility of cloth based products, the construction of products requiring strict flower splicing can not be as accurate as paper-based PVC wallpaper, especially for cross grain products. When there is no problem with the wallpaper quality, there will be obvious seams. Please pay attention to them when using.

Other construction requirements are the same as those of paper-based PVC products.